The Canon PowerShot SD100 uses the built-in lens (fixed-lens camera) with a 6.50× crop factor (about 5.5 × 3.7 mm sensor). Below: equivalent focal lengths, maximum shutter speeds for sharp stars, a hyperfocal distance chart and how to check the shutter count.
Equivalent focal length & field of view
| Lens focal length | Full-frame equivalent | Diagonal FOV | Horizontal FOV |
|---|---|---|---|
| 8 mm | 52 mm | 45.0° | 37.9° |
| 10 mm | 65 mm | 36.7° | 30.8° |
| 12 mm | 78 mm | 30.9° | 25.8° |
| 14 mm | 91 mm | 26.6° | 22.2° |
| 16 mm | 104 mm | 23.4° | 19.5° |
| 18 mm | 117 mm | 20.9° | 17.4° |
| 20 mm | 130 mm | 18.8° | 15.7° |
| 24 mm | 156 mm | 15.7° | 13.1° |
| 28 mm | 182 mm | 13.5° | 11.2° |
| 35 mm | 228 mm | 10.8° | 9.0° |
| 50 mm | 325 mm | 7.6° | 6.3° |
| 85 mm | 552 mm | 4.5° | 3.7° |
| 135 mm | 878 mm | 2.8° | 2.3° |
Multiply by the 6.50× crop factor for the full-frame equivalent field of view.
Milky Way exposure: NPF and 500 rule
| Focal length | NPF @ f/1.8 | NPF @ f/2.8 | Strict NPF @ f/2.8 | 500 rule |
|---|---|---|---|---|
| 8 mm | 16.9 s | 21.2 s | 11.6 s | 9.6 s |
| 10 mm | 13.5 s | 17.0 s | 9.3 s | 7.7 s |
NPF = (35 × f-number + 30 × pixel pitch) ÷ focal length, with a pixel pitch of 2.4 µm (typical for this format — exact resolution not in our database). The strict version (Michaud's detailed NPF for the galactic core) gives pin-point stars at 100% view; the 500 rule is a loose rule of thumb that shows trailing on modern sensors.
Hyperfocal distance chart
| Focal length | f/2.8 | f/5.6 | f/8 | f/11 | f/16 |
|---|---|---|---|---|---|
| 10 mm | 7.8 m | 3.9 m | 2.7 m | 2.0 m | 1.4 m |
Focus at the hyperfocal distance and everything from half that distance to infinity is acceptably sharp (circle of confusion 0.0046 mm). Use the hyperfocal calculator for other settings.
How to check the Canon PowerShot SD100 shutter count
Canon stores the count only for some models (mostly recent mirrorless bodies such as the R-series). Older EOS DSLRs usually need a tethered utility that reads the counter over USB. Try `exiftool -ShutterCount -MechanicalShutterCount image.cr3`.
ExifTool tag: ShutterCount / MechanicalShutterCount. Always test an original, unedited file straight from the card.
Where to buy
Compare new and used prices at these retailers:
B&H PhotoAmazonKEH (used)MPB (used)