The Fujifilm FinePix HS20EXR uses the built-in lens (fixed-lens camera) with a 5.71× crop factor (about 6.3 × 4.2 mm sensor). Below: equivalent focal lengths, maximum shutter speeds for sharp stars, a hyperfocal distance chart and how to check the shutter count.
Equivalent focal length & field of view
| Lens focal length | Full-frame equivalent | Diagonal FOV | Horizontal FOV |
|---|---|---|---|
| 8 mm | 46 mm | 50.6° | 43.0° |
| 10 mm | 57 mm | 41.5° | 35.0° |
| 12 mm | 69 mm | 35.0° | 29.4° |
| 14 mm | 80 mm | 30.3° | 25.4° |
| 16 mm | 91 mm | 26.6° | 22.3° |
| 18 mm | 103 mm | 23.8° | 19.9° |
| 20 mm | 114 mm | 21.4° | 17.9° |
| 24 mm | 137 mm | 17.9° | 15.0° |
| 28 mm | 160 mm | 15.4° | 12.8° |
| 35 mm | 200 mm | 12.3° | 10.3° |
| 50 mm | 286 mm | 8.7° | 7.2° |
| 85 mm | 485 mm | 5.1° | 4.2° |
| 135 mm | 771 mm | 3.2° | 2.7° |
Multiply by the 5.71× crop factor for the full-frame equivalent field of view.
Milky Way exposure: NPF and 500 rule
| Focal length | NPF @ f/1.8 | NPF @ f/2.8 | Strict NPF @ f/2.8 | 500 rule |
|---|---|---|---|---|
| 8 mm | 16.9 s | 21.2 s | 11.6 s | 10.9 s |
| 10 mm | 13.5 s | 17.0 s | 9.3 s | 8.8 s |
| 12 mm | 11.2 s | 14.2 s | 7.7 s | 7.3 s |
NPF = (35 × f-number + 30 × pixel pitch) ÷ focal length, with a pixel pitch of 2.4 µm (typical for this format — exact resolution not in our database). The strict version (Michaud's detailed NPF for the galactic core) gives pin-point stars at 100% view; the 500 rule is a loose rule of thumb that shows trailing on modern sensors.
Hyperfocal distance chart
| Focal length | f/2.8 | f/5.6 | f/8 | f/11 | f/16 |
|---|---|---|---|---|---|
| 10 mm | 6.7 m | 3.4 m | 2.4 m | 1.7 m | 1.2 m |
| 14 mm | 13 m | 6.6 m | 4.6 m | 3.4 m | 2.3 m |
Focus at the hyperfocal distance and everything from half that distance to infinity is acceptably sharp (circle of confusion 0.0053 mm). Use the hyperfocal calculator for other settings.
How to check the Fujifilm FinePix HS20EXR shutter count
Fujifilm records an image counter (ImageCount) in MakerNotes on many X-series bodies; it counts frames rather than mechanical actuations. Run `exiftool -ImageCount image.raf`.
ExifTool tag: ImageCount. Always test an original, unedited file straight from the card.
Where to buy
Compare new and used prices at these retailers:
B&H PhotoAmazonKEH (used)MPB (used)